Analog type pirani vacuum gauge

Pirani Vacuum Gauge Model: GP-1G

ULVAC

Print/Download

For more information on ULVAC products, purchase, and/or consideration, click here.

This Model is a pirani vacuum gauge utilizing heat conduction of a gas.A platinum wire is used, therefore, the units will not break even at atmospheric pressure.The gauges have a wide range of applications and can easily measure pressures in the low vacuum range.
Various types of interlocks and pumping sequence control are available within a set point.

Features

No re-calibration is needed after changing gauge head cable length
Employs proven gauge heads
Corrosion-resistant platinum (Pt) is employed as filament material
DC 0 to 10 mV recorder output as standard

Applications

Pressure measurement in roughing pumping systems
Pressure monitoring in various vacuum pumping systems
Interlocks, sequencing, and other control system related functions for practical vacuum equipment
Process control of various vacuum equipment

Specifications

Model		GP-1G	GP-1G with case
Measurable pressure range		0.4 - 2700Pa
Pressure unit		Pa
Measurement locations		1
Accuracy		±3% of full scale (linear scale conversion)
Display		Analog indication
Sampling time		ー
Measurement value output		DC 0 to 10mV Nonlinear output
Set points		ー
Communication serial／Digital output		ー
Operating temperature range		10 to 40℃ (50 to 104°F)
Operating humidity range		15 to 18% (not condensing)
Power supply voltage		AC100 to 240V
		10VA
Dimension　W×D×H		100×130×100mm	100×130×100mm
Controller weight		Meter：0.7kg	Meter：1.4kg
		Detection unit （GP-H）：35g
Accessories	Power cable	3m (with controller)
	Input / output connector	ー
	Quick manual	1
Options	Sensor head	Various types of gauge heads including WP-01, 02, 03, 16, and WPB-10-034
	Detection unit	GP-H, GP-BH special cable (WPB-10-034)
	Sensor head cable	2, 5, 10, 15, 20, 25, 30, 50, 100m

Support page for Model: GP-1G

Specifications

Model		GP-1G	GP-1G with case
Measurable pressure range		0.4 - 2700Pa
Pressure unit		Pa
Measurement locations		1
Accuracy		±3% of full scale (linear scale conversion)
Display		Analog indication
Sampling time		ー
Measurement value output		DC 0 to 10mV Nonlinear output
Set points		ー
Communication serial／Digital output		ー
Operating temperature range		10 to 40℃ (50 to 104°F)
Operating humidity range		15 to 18% (not condensing)
Power supply voltage		AC100 to 240V
		10VA
Dimension　W×D×H		100×130×100mm	100×130×100mm
Controller weight		Meter：0.7kg	Meter：1.4kg
		Detection unit （GP-H）：35g
Accessories	Power cable	3m (with controller)
	Input / output connector	ー
	Quick manual	1
Options	Sensor head	Various types of gauge heads including WP-01, 02, 03, 16, and WPB-10-034
	Detection unit	GP-H, GP-BH special cable (WPB-10-034)
	Sensor head cable	2, 5, 10, 15, 20, 25, 30, 50, 100m